Looking forward to asbestos floor tile removal? Before you even start, keep this in mind: removing asbestos floor tile needs to be done carefully. Don’t worry, though. Here we have a simple guide that you can follow if you have decided that you want to remove them yourself. Let’s start.
Isolating the Area
Do keep in mind that asbestos is dangerous if spread into the air. So, the first and foremost thing to do is to isolate the area. You can do this by covering doors, windows, vents, cupboards with plastics and secure it with tape. You should spray the floor tile with water as well. These things are done to ensure that asbestos dust does not spread and stick to those areas. When you remove the tile, do remove the entire piece of the tile. Removing the entire piece of the tile helps prevent asbestos particles spread into the air.
Wear Proper Equipment
This can’t be overemphasized. Before your asbestos floor tile removal process is started, wear your protective gear. Not only a goggle and a dust mask, you must also wear coveralls, boots, and gloves. This will keep you from harm as well as inhaling any asbestos fibers.
Preparing the Floor Tile
Next, prepare the floor tile. You can cut the asbestos into pieces with your knife. After that, lift the tiles and use a scraper to separate it from the floor. Lift and put the tiles in a bag and make sure it doesn’t have any holes in it. Don’t forget to label the bag with “dangerous material” and/or “asbestos.”
Cleaning the Floor
Find any extra glue? Clean them using a wet towel. If there is any remaining dust on the floor, make sure you clean it too. You can use towels to do it. Also, remember to keep changing the water. To clean the area better, you can add liquid detergent as well. Mop the area if needed.
Floor Debris Disposal
Lastly, you need to deal with the floor debris. Do keep in mind that you can’t just throw it out in the landfill. After all, asbestos is dangerous. For floor debris disposal, you will need to consult with your local government to find out where the debris can be disposed of.
Is It Necessary to Remove the Tile?
Asbestos floor tile removal can be necessary and unnecessary. It all depends on your situation. For instance, if you have an older house and the asbestos floor tile is damaged or not in a good condition, removal will be necessary. Conversely, if the asbestos floor tile is not damaged and is still in a good condition, removal is unnecessary. This is because asbestos does not pose risk if it is in a good condition and undisturbed.
If you feel that asbestos floor tile removal is tiresome, you don’t need to do it yourself. You can always hire an asbestos abatement company to remove them. While this is obviously cost more money than doing it yourself, it is less risky and will be better done. That being said, the final decision is yours. Whether you want to do it DIY way or hiring a company to do it, it is all up to you. If you do decide to do it yourself, just be sure to do it carefully.